Our kitchen feels like it’s coming together at last this week, with the installation of our counters, sink, and new faucet. But then we remember there’s still lots to do: finish the cabinet painting and sealing, figuring out the open shelves we want to install, mounting the microwave, backsplash, wood floors and trim, painting and adding cabinet top molding. It’s still exciting to see colors coming together though.
The extra cabinet we wanted to install on the far wall actually came in last week, so we were able to get that base cabinet installed in time for the granite guys to put the top on. We obviously still haven’t built the island, so that piece of granite is sitting in the garage. Granite is simply laid on top of a cabinet with a thin bead of clear silicone caulk, so we can do that ourselves when we’re ready, and they said the island slab only weighs about 80 lbs. Here’s the rest of the pieces installed:
I like the green with the counters overall, and I think once the doors are on with new hardware will complete the look. It’s a little…country looking, but I think using hardware with sharper angular lines will help shift that towards a more modern look. This is what helped direct us when we picked a sink faucet, so this is the one we decided on. It got installed by the plumber on Wednesday.
I like the angular look, but I have one major complaint about this sink that Nik was supposed to address with the plumber since he was the one at home when the guy came. The on/off knob you can see points straight up when it’s off, and it pulls out to the right to turn on the flow, and then you can adjust it towards or straight up to vertical to change the temperature. But if you just pull it out from the vertical off position, it’s HOT water. So to get cold, you have to first pull it towards you, then out. This seems really backwards right? I checked Delta faucets, and they do their temperature control the way I think it should be…but this faucet is a Moen and apparently they do it opposite. I asked Nik to have the plumber switch the hoses so up would be cold…but we all know how that goes when we put men in charge of details such as this! So now I’ve tasked Nik with switching the hoses at some point.
Nik also had him switch the disposal to the left side to be closer to the dishwasher. We thought we’d be able to salvage our old functional one, but apparently when we removed it from the old sink when we were doing the demo ourselves, we removed it incorrectly (no thanks to the youtube video we watched which told us “exactly” how to remove it!) and whatever we did to the edge of it, it couldn’t be reused. That’s ok though – the new one was only $80 and didn’t have years worth of nasty grime and rust all over it.
We have one more decision to make about decor in the kitchen – the backsplash. I’ve been thinking something along the lines of white subway tile would be simple and cheap, and white will further brighten and hopefully open the space, which I’m still wary of because of the dark cabinets and soon-to-be dark wood floor. We also have quite a bit of backsplash to lay (probably 35-40 square feet when you add it all up), since we opted to have counters with no granite backsplash, so anything too fancy would get pricey. Last night we wandered to Lowe’s and took a look at their options. After our trip, clean white subway tile is definitely the direction we’re going – you can see the counters are pretty busy, so we think any accent tiles, even just a row, will just exaggerate that. I liked the white glass subway tile, but at almost $3 a tile that isn’t going to happen!
We picked out 3 styles of subway tile – a more decorative one on the left (about 3″x6″ and 49 cents a tile), which I love, but it has more going on and could look too busy. Then a larger subway tile (4″x8″, 69 cents a tile) and standard subway tile (approximately 3″x6″, and 22 cents each).
I kind of like how clean the big tiles look…but the small ones are nice too. We’ll probably do a pretty thin grout line with some contrast (maybe a light gray), since we want to see some definition of the tiles but not make them look too busy with high-contrast dark grout. I think with white grout you lose the tiles:
Dark grout is a little dizzying to me, unless the rest of the kitchen is very plain. But even this kitchen with very plain counters, I think the grout is a bit much to take in:
Light gray grout gives soft definition but isn’t too bold/busy, and you can see it even looks nice with a more patterned counter top like ours (second picture). The one on the left also has slightly larger/longer tiles…which I kind of like better. The store did carry one other subway tile size that was more that shape (larger/longer) so that’s an option too.
And we’ll probably do a standard subway tile pattern (staggered, like the ones above). The guy at the store suggested herringbone, which I love, but with Nik’s constant battle with perfection I think this is probably a bad idea. Plus herringbone is a pretty busy pattern, so it might compete with the counters. This kitchen did a beautiful herringbone pattern, but they have very simple white counters unlike ours, so it works:
In conclusion…we haven’t made any decisions, but we’re getting there! This weekend we should be able to get the microwave mounted and get some more doors painted, and maybe even start on ripping up the floors.