Monthly Archives: July 2017

Coming Together

This past weekend was productive again, thanks to a 4 day weekend with July 4th. We hadn’t planned to go anywhere, and I was anticipating working Monday, but the company unexpectedly gave us the day off. Every time we have 4 days off in a row, we tend to travel to visit family, so 4 days off and staying at home was an unusual situation. It resulted in a lot of progress with the bathroom with things finally starting to feel like they were coming together. And after 4 days, I was definitely feeling antsy to get back to work on Wednesday. Win-win.

Saturday morning we got started with the shower pan, and everything went very smoothly with the proper mortar. We mixed it to a pudding-like consistency, then got the pan placed neatly in the middle. We checked the levelness of each side, and as we hoped, everything was level and sloping towards the drain. I was afraid to step on the pan for 3 days afterwards (even though the mortar should’ve been set within 24 hours), but I finally stepped on it last night and it feels super solid. Done!

IMG_3680

IMG_3682

On to the wall paint. We were debating between two colors, both light gray and one that was more blue/cool toned and one that was more brown toned. We ended up going with the brown-toned gray and I love the color. Of all the expensive renovations we’ve done, getting paint on the walls so they’re not the awful yellow-white “landlord” paint is usually one of the pinnacle moments that transforms a room.

After paint, we started measuring for the floor trim. We added fresh baseboard and fresh shoe trim over that (~$40 for new trim). Getting the shoe trim attached was tricky, because unlike all our floor installation downstairs we actually removed all the baseboard to do this renovation, and remounted the baseboard higher. This meant when we shot a nail through the shoe trim, there was only a fraction of an inch of baseboard behind it, so in some places we couldn’t get good attachment with a nail. Liquid nails solved the problem in those spots. Then we filled and painted nail holes and caulked the gaps.

IMG_3664

Before trim

IMG_1901

After trim

Then we finished sealing the vanity with polycrylic – this is supposed to dry clear, but after earlier uses sealing stained furniture, we do tend to notice a bit of yellowing, which showed up more in some places on our white vanity. If it continues to yellow over time, we can always sand down and repaint…but for right now, it’s good to go.

IMG_1903

We then got the vanity top all unpacked and opened up our new Pfister Ladera faucets which we purchased at Home Depot for $99 each. When I picked out this sink top, I noticed it had what they called 8″ wide spread faucet holes, and I asked if the wide spread faucets are more expensive than standard faucets. “Oh, about $5-10 more” says the salesman. WRONG. It was hard to find a nice looking widespread set for under $120 at Lowe’s, while the standard 4″ center set faucets were all in the $50’s-$70’s, so we moved on to Home Depot which had a slightly less expensive selection. There is also a matching shower faucet set, which we haven’t bought yet, but when the time comes I liked the looks of it.

IMG_1904

Usually Nik does all the fancy plumbing work, but with two faucets to install, I sat next to him and watched each step and repeated. I noticed he assigned me to do the faucet on the side that I would use…reasonably assuming my disinterest in absolute perfection would result in a faucet head installation that wasn’t up to his standards. But, they both came out looking great in the end.

IMG_1908

We popped the vanity top onto the sink just to see how we liked it, and to decide if we wanted everything against the wall, or slightly shifted. We picked our location, then went through a grueling process of lifting one end of the vanity while I added a bead of silicone caulk around the cabinet tops, then slowly lowering the vanity top back down precisely to create somewhat of a seal. We got it done, but ended up doing another bead of caulk around the edges once it was in place to make it look prettier.

Nik finished up the actual plumbing installation and hooking things into the pipes, so the sink is functional! I still need to seal the countertops, since they are actual marble (a veneer, but still real stone) and Nik got a splash of water on them and confirmed they definitely get water stains. We bought Rock Doctor countertop sealer, so that just needs to be applied in a few coats which should do the trick. There’s also a backsplash piece which just needs to be adhered in place and sealed, and then the sinks are ready for use.

Next, Nik cleaned off the toilet plumbing area (I know it’s just old wax, but it looks like poop so I refused to deal with that mess). He purchased a new foam ring ($13) and got it situated around the hole. We lowered the old toilet in place and attached the plumbing, and Nik has since confirmed it is functional. It does still need a bead of caulk around the base, but that isn’t urgent.

IMG_1909

While purchasing faucets, we also browsed the lighting aisle for a new vanity light. Nothing really caught our eye, but we decided to go ahead and buy one since the old one had already been removed and we were down a light in the room. Nik got it mounted and installed in no time, and I think it fits the bill well enough, for $100.

IMG_1907

We’d like to get started on our shower soon, which will include installing thick cement board around the space, waterproofing it with 1-2 layers of roll-on red guard, applying mortar, tiling, grouting, installing the faucet hardware, and finally installing the shower doors. We might have to hold off a bit with the cement board this weekend, since we ordered a shower niche insert that unfortunately won’t arrive till Monday.¬†We know the approximate dimensions we’d have to cut out of the cement board for this niche to fit…so we might go ahead and get that started this weekend.

I’ll leave you with a picture of our freshly opened sunflower from this morning…the bees have already found it!

sunflowr.jpg