Tag Archives: console

Finished Console

Two posts in one week! Well, I did promise I’d have some pictures up soon of the project we just completed for our good friends Lindsey and Dave, so here it is.

They were looking for a console to hold their TV boxes with some extra storage, and we were looking for a way to thank them for all the help they gave us at our wedding. So we started looking for a piece of furniture that would fit their living room space. We finally found this buffet on Craigslist and I haggled the price down a bit with the seller:

IMG_3209

This piece was big, 48″ wide and about 17″ deep. And it was heavy and solid – after working with it, most likely mahogany. It had a solid piece of wood on the top and the door/drawer fronts and veneer with some damage near the feet on the sides. So we decided we’d keep the solid wood sections stained, and paint the rest of the body. Stripping the old varnish off the wood was first on the list:

IMG_3408

Then came sanding the sections to be painted, and patching the veneer with wood filler.  A lot of filler goes on, then is sanded smooth.

IMG_3415

IMG_1822

The drawers and doors also got stripped and sanded, then the stained along with the top. The wood grain was really beautiful:

Then the body got dragged inside (I hope the phrases I use here aren’t searchable or the authorities will certainly be after me) for primer. We needed 2 coats since the redness of this wood soaked right through the first coat of primer – one of the reasons we think it was mahogany. Then finally paint, which i forgot to take a picture of:

IMG_1821

The challenge with this piece ended up being the doors. Lindsey wanted non-solid doors so they could use the remote through them, so we suggested glass or radiator grate as an option. She bought some small pieces of crafting-grade radiator grate though JoAnn Fabrics and tested the remote through it and it worked! So we went with that.

nik 2

A router has been passed down to Nik from his father/grandfather, so he learned how to use it and purchased a bit that could make cut outs for the door. He also bought a router jig that helps you to cut straight edges with the router. I still don’t entirely understand how routers function…but from my limited understanding, it’s essentially a fast rotating bit that cuts smoother than a jigsaw, and also allows you to turn corners (because it’s rounded) and, if you buy a bit with a cool profile, can add ornate edges to your cut.

Nik did quite a few practice cuts on scrap wood, then felt confident enough to tackle the doors. They came out great, and he left a small edge for us to butt the grate up against to secure it in place, kind of like when you have a picture frame and the glass butts up against the frame and that holds the glass in place. The radiator grate was thin aluminum that was just trimmed to size with heavy duty scissors.

nik 1

nik 3

nik 4

After that, we finished staining the newly cut door edges, then sealed up all the stained parts with water based poly, and put all the parts back together. This piece came with cool old handles, but they were very tarnished, so Lindsey and I had fun spray painting the handles a soft silver color, and then the door handles were replaced with some new crystal knobs to add a little glitz.

The inside is basically an open cavern, so we’re working on a little shelf to put in there, but other than that, this project is finally done! The paint color we used was the same color as the little shelves we added to our master bath:

IMG_2747

To be honest, I was not really sure about this color when we finished it and it was sitting in our living room. I thought it should be changed to a cream color. But we decided we’d give it a try in Lindsey and Dave’s living room and see if the lighting there changed our mind, and it definitely did! We all think it looks great in their space. One more funny note, is the door and the drawer stains match 100% – but once they were installed, the vertical grain on the doors reflects light much darker than the horizontal grain on the drawers. Wood is always interesting! So here’s the official before and after:

IMG_3209

IMG_3581

A well deserved thank you to Lindsey and Dave for being amazing friends and offering so much help at our wedding to make it a flawless day!

1N0A0899.jpg