Tag Archives: paint sprayer

Spring Update

It’s been a couple weeks since I’ve given an update, and we’ve made lots of progress on a few different projects.

Our garden is planted, for the most part, and includes snow peas, a couple jalapeno peppers, eggplants, 2 roma-variety tomatoes and 1 grape tomato, bush zucchini, spaghetti squash, large sized andĀ  pickling sized cucumbers, various herbs, and leeks. We started everything from seed inside about a month ago (except the snow peas, which were planted outside and are now a perfect row of happy little pea plants), so we’ll see how this goes. Doesn’t look like much now!

IMG_1736

IMG_1738

We’ve also gotten a number of perennial flowers happily planted in our new flower bed, and everything is really starting to grow with the recent warmer weather.

IMG_1729

We made some mild progress on our balusters, and got them all primed with the paint sprayer a few weeks ago:

IMG_3360

IMG_3362

But then the pollen hit and we decided to hold off on doing the final paint coat. No one wants yellow paint on their stairs! So these are still piled in our living room awaiting that fate.

We are almost done with our little side tables for our guest bedroom – they got stained on top, and got a coat of light gray paint (a runner-up color for our kitchen cabinets, when we were still considering painting them gray, so we already had that paint). Another coat of paint and some sealer and they’ll be all done. Here are some photos of this project from the beginning. They are kinda-matching, kinda-not:

IMG_3412

The paint stripper took of multiple layers of gummy, old paint.

IMG_3367

Tops all sanded

IMG_3371

Getting some stain

We’ve also made some progress with the buffet piece we’re refurbishing for our friends…the wooden surfaces we salvaged are all stained now, and the body is waiting for primer and paint. Nik busted out the router this weekend to practice with, since we’ll be attempting to cut out the middle of the solid doors in the front of the piece to put in some radiator grate or glass so they can put their cable box in there and still get a signal through to their remote. I’ll save pictures of this till the end…so it can be a surprise!

The weather was beautiful yesterday, so I dragged all the cut pieces of crown molding out of the garage, gave them a quick sanding and dust-off, and got the paint sprayer out. I’ve never put semi-gloss paint in the sprayer (which is what we use for our trim paint) so I was a little worried about how tacky it might feel – but it worked like a charm! The finish was really nice, and a bit glossy (not as glossy as when painted on with a brush). We had one minor clog in the gun, but running some water through it seemed to fix the issue.

So that took all of 15 minutes to do, once everything was set up. After about an hour of dry time, we decided to just go ahead and mount the pieces since we already had pressure in the air compressor. We started in the dining room and made it most of the way around the living room. There’s a few pieces left to hang but we finally called it quits at dinnertime.

IMG_1745

IMG_1740

Everyone knows crown molding is challenging – and we definitely have some wonky corners/edges. I think the challenge is not finding the right angle, but getting the piece perfectly level and lined up in the saw – especially if its a 12′ wobbly piece hanging out the other side of the saw. If it’s not perfectly level, your angle can be a few degrees off. That combined with our walls/ceilings which aren’t remotely straight has left us with some intimidating gaps. We’re just going to have to make really good friends with the caulk gun for this project!

IMG_1744

IMG_1743

Before

IMG_1748

After!

Despite my attempt to make organized lists of things to accomplish for the weekend, Nik always manages to go off and start a completely new project – like ripping apart most of our side deck off the garage, and replacing the floor, stair treads, and railing. Granted, this did have to happen at some point since the boards were completely splintering. He used left over wood pieces from the jungle gym – but we need to get a few more boards to finish the stair treads and railing. Before:

IMG_3425

During and after:

Progress-wise, our goal this month is to get the crown molding finished and patched, get somewhere with the stair railings/balusters, get our friends’ buffet piece and our guest bedroom tables finished up, and wrap up refinishing a dining table in the garage that we’ve had for a while that Nik recently unearthed and started working on. And THEN we can start on our bathroom!

 

Making Balusters

I find that when I make a blog post with goals and plans, we get more done that weekend. So here we go: last weekend we did make a lengthy trip to Lowes to investigate our stair options. We measured our stairs, and realized we only need 2 x 8′ pieces of plowed handrail to cover the sections that will have balusters, and 1 x 12′ piece of unplowed handrail to cover the walled section that won’t require balusters. Plowed handrails basically just have a small groove on the bottom, to hold the balusters in place and hide that junction. There is also a little slat of wood that slides out of the bottom of that groove, called a fillet, and I think you can cut this to fit between each baluster to get them spaced evenly and further secure them in place (fillet shown in the right picture):

Image result for unplowed vs plowed handrail Image result for plowed handrail

Our plowed groove is only 1.25″ wide, so that will be the width of our square balusters. The ones we have upstairs are currently 1.75″ and they feel too bulky, so I think the 1.25″ will be a nice, airy upgrade.

IMG_3306

So the two plowed 8′ railings were $47 each and the 12′ unplowed one was $57, totaling $151. Unfortunately, after all the effort of getting the 12′ one home sticking out the trunk, we realized we bought a 12′ plowed one ($20 more expensive!) so we’ll have to return that and get the unplowed one. To mount that one to the wall, we’re not sure the plowed bottom will attach to the brackets correctly, since they’re designed to attached to an unplowed rail.

Speaking of brackets for that handrail, we bought some new ones that are a bit more attractive and substantial since this railing is heavier than our previous one. Those were about $18 total. We also bought two oval wooden wall plates for where the banister hits the wall, $14 total. Not sure those are both necessary yet, but we can return them if they’re not needed.

Finally, we headed to the lumber section to see what we could use for balusters. We found 2″x2″x36″ pieces of poplar or oak that were nice quality wood – but $6 each! We need 28, so that would be $168. Too pricey. So we wandered further into the lumber section and found plain 2×6 white pine boards (actual size 1.5″ x 5.5″ x 8′ length). Some were bowed or had bad knots, but after about 20 minutes we had selected 4 satisfactory boards. We measured that we could get out 8 balusters per board, and, best part, each board was a little less than $5, totaling $19, and leaving us with 4 extra balusters for when we inevitably mess some up. That savings almost pays for our table saw that we used to cut them all!

So on to the cutting…Nik first cut them to length with the miter saw, leaving some extra length for figuring out the exact height that will be on the slanted section of our new railing area:

IMG_0713

Code is 32-38″for balusters on steps, so since they should all be the same height here with a knee wall vs. individual steps, we’ll aim for 34″. Then he used the table saw to rip one edge off the board and make it a fresh, flat cut. Then we ripped the remaining 3 sides on each baluster to get them to 1.25″ (remember, theĀ  boards are 1.5″ thick and we wanted a fresh, sharp cut on each side).

IMG_3357

So I think it was a total of 8 initial rip cuts for the original pieces of wood, then 3×32 cuts on each baluster. Over 100 table saw cuts certainly took a while and the noise potentially annoyed some neighbors on a Sunday evening. It looked like we’d been snowed on afterwards, but we got them all done!

IMG_3355

IMG_3356

This Saturday we’re finally having a yard sale in the morning to clear out some pre-wedding housewares and other clutter we’ve collected, but the afternoon should be warm and lovely – a perfect time to get out the paint sprayer! We use this one from Amazon: https://www.amazon.com/Critter-Spray-Products-22032-Siphon/dp/B00006FRPJ.

Critter Spray Products 22032 118SG Siphon Gun

It is cheap (but requires a good air compressor), and is only practical for small painting projects (trim or cabinets – not walls, for example). It screws right on to cheap pint sized mason jars, and we always strain the paint first, then thin it a little bit with floetrol and water for water-based latex paints, to prevent clogging.

We also bought more crown molding while at Lowes last weekend, so we’ll cut the remaining pieces we need to finish off the living room walls, then do a massive paint sprayer session on all the crown molding and all the balusters. We might do a protective clear coat of water based polycrylic on the balusters after they are installed, depending on how durable the finish feels with the paint sprayer. On Sunday we’ll do more paint spraying if we don’t get it all done Saturday, and hopefully get the remaining sections of crown molding installed.

The next steps will be caulking, filling, and doing touchup paint on the crown molding. For the stairs, we’ll need to sand, stain, and seal the new handrails, remove the old banister/balusters upstairs, and move on to installing the new ones…then caulking, filling, and doing touchup paint where needed. The sooner we get these projects done, the sooner we can start thinking about our master bath renovation – that’s good motivation for me!